Oracle RAC Setup Guide

Follow these instructions to replicate your Oracle RAC database to your destination using Fivetran.

Prerequisites

To connect your Oracle RAC database to Fivetran, you need:

A Fivetran account with an Enterprise or Business Critical plan
Oracle 11g or above
Your database host's IP (e.g., 1.2.3.4) or domain (e.g., your.server.com)
Your database's port (usually 1521 for unencrypted connections and 2484 for encrypted connections using SSL/TLS)
Your database's system identifier (SID)/service name

Setup instructions

Choose connection method

IMPORTANT: Do not perform this step if you want to use the Hybrid Deployment model for your data pipeline.

Decide how you want to connect your Oracle RAC database to Fivetran:

Connect directly (TLS required)

Fivetran connects directly to your Oracle RAC database. This is the simplest and most secure method.

IMPORTANT: You must have TLS enabled on your Oracle database to connect directly to Fivetran. Follow Oracle's instructions to enable TLS on your database either with a client wallet or without a client wallet.

To connect directly, configure your firewall and/or other access control systems to allow incoming connections to your Oracle database host and port (usually 1521) from Fivetran's IPs for your database's region. How you do this will vary based on how your Oracle database is hosted (cloud platform, on-premises, etc.).

Connect via SSH (TLS optional)

Fivetran connects to a separate server in your network that provides an SSH tunnel to your database. You must connect through SSH if your database is in an inaccessible subnet.

IMPORTANT: You must connect using an SSH tunnel if your Oracle RAC database is version 12.1 or below.

To connect using SSH tunnel, follow our SSH connection instructions. If you want Fivetran to use end-to-end encryption using TLS, follow Oracle's TLS setup instructions either with a client wallet or without a client wallet.

Connect using private networking

Private networking enables communication between private networks and services without exposing traffic to the public internet. Private networking is the most secure connection method.

IMPORTANT: You must have a Business Critical plan to use private networking.

We support the following providers:

AWS PrivateLink – used for VPCs and AWS-hosted or on-premises services. See our AWS PrivateLink setup guide for details.
Azure PrivateLink – used for Virtual Networks (VNets) and Azure-hosted or on-premises services. See our Azure PrivateLink setup guide for details.
Google Cloud Private Service Connect – used for VPCs and Google-hosted or on-premises services. See our Google Cloud Private Service Connect setup guide for details.

Connect using Proxy Agent Beta

Fivetran connects to your database through the Proxy Agent, providing secure communication between Fivetran processes and your database host. The Proxy Agent is installed in your network and creates an outbound network connection to the Fivetran-managed SaaS.

To learn more about the Proxy Agent, how to install it, and how to configure it, see our Proxy Agent documentation.

Create user

Create a database user for Fivetran's exclusive use.

Connect to your Oracle RAC database as an admin user.
Execute the following SQL commands to create a user for Fivetran and grant it permission to connect to your database. Replace <username> and <password> with a username and password of your choice.
NOTE: Usernames in Oracle are case sensitive. For example, fivetran is not the same user as FIVETRAN.
Multitenant container database usernames must start with C## because they are common users.
For standalone databases
```
CREATE USER <username> IDENTIFIED BY <password>;
GRANT CREATE SESSION TO <username>;
```
For multitenant container databases
You must create a common user at the container level. Create the user with the container as the active session and grant the following permissions:
```
ALTER SESSION SET CONTAINER=CDB$ROOT;
CREATE USER <username> IDENTIFIED BY <password> CONTAINER=ALL;
GRANT CREATE SESSION, ALTER SESSION, SET CONTAINER TO <username> CONTAINER=ALL;
ALTER USER <username> SET CONTAINER_DATA=ALL CONTAINER=CURRENT;
```

Grant read-only access

Grant the Fivetran user read-only access to the data you want to sync.

NOTE: Oracle database defaults to using upper case letters, unless the values are surrounded by double quotes.

Grant the Fivetran user SELECT permission for each schema and table you want to sync. Follow the instructions below for your database type:

For standalone databases

GRANT SELECT ON "<schemaA>"."<tableA>" TO <username>;
GRANT SELECT ON "<schemaA>"."<tableB>" TO <username>;
GRANT SELECT ON "<schemaB>"."<tableC>" TO <username>;

Alternatively, you can grant access to all tables.

GRANT SELECT ANY TABLE TO <username>;

For multitenant container databases

Execute the following command before granting permissions. Replace <PDB> with the name of the pluggable database (PDB) that you want to connect to Fivetran.

ALTER SESSION SET CONTAINER=<PDB>;

GRANT SELECT ON "<schemaA>"."<tableA>" TO <username>;
GRANT SELECT ON "<schemaA>"."<tableB>" TO <username>;
GRANT SELECT ON "<schemaB>"."<tableC>" TO <username>;

Alternatively, you can grant access to all tables.

GRANT SELECT ANY TABLE TO <username>;

Grant the Fivetran user access to the DBA_EXTENTS, DBA_TABLESPACES, and DBA_SEGMENTS system views. We use these views to optimize our initial import queries.
```
GRANT SELECT ON DBA_EXTENTS TO <username>;
GRANT SELECT ON DBA_TABLESPACES TO <username>;
GRANT SELECT ON DBA_SEGMENTS TO <username>;
```
Grant the Fivetran user access to the SYS.V_$DATABASE view. We use this view to determine whether the database is a container database (CDB).
```
GRANT SELECT ON SYS.V_$DATABASE TO <username>;
```

Configure incremental sync method

To keep your data up to date after the initial sync, we use one of the following incremental sync methods. Each of these methods keeps a record of recent data changes, which allows Fivetran to update only the data that has changed since our last sync. To learn the differences between the two methods, see our incremental sync documentation.

Follow the instructions below for your incremental sync method:

LogMiner

IMPORTANT: Fivetran's Oracle RAC connector can only connect to a single node in a cluster. We do not support SCAN listener connections.

To enable LogMiner, do the following:

If ARCHIVELOG mode is not enabled on your database, enable ARCHIVELOG mode.
NOTE: Enabling ARCHIVELOG mode requires the Oracle instance to be briefly taken offline. To learn more, see Oracle's archived redo log file documentation.
i. Shut down all database instances.
```
$ srvctl stop database -d <db_unique_name>
```
ii. Start the database in mount mode.
```
$ srvctl start database -d <db_unique_name> -o mount
```
iv. Enable archive logging.
```
$ sqlplus / as sysdba
sql> ALTER DATABASE ARCHIVELOG;
sql> ALTER SYSTEM SET LOG_ARCHIVE_DEST_1='LOCATION=<SHARED_LOCATION>' SCOPE=SPFILE;
sql> EXIT;
```
NOTE: <SHARED_LOCATION> could be any of the following:
- Automatic Storage Management disks
- Flash Recovery Area
- NFS
- Shared storage
v. Stop the database.
```
$ srvctl stop database -d <db_unique_name>
```
vi. Restart all database instances.
```
$ srvctl start database -d <db_unique_name>
```
vii. Verify that archiving is enabled.
```
sql> archive log list;
```
IMPORTANT: The connector's database host must have access to the archived logs of all other nodes in the cluster.
NOTE: We recommend that you set ARCHIVE_LAG_TARGET to a non-zero value. This setting reduces the lag in changes being synced.
Configure Oracle RMAN to retain backups and archive logs for at least 24 hours. We recommend retaining data for seven days.
IMPORTANT: To sync your data, Fivetran must have a minimum of 3 hours' worth of log data to analyze. You cannot finish setting up your connector until 3 hours after you configure RMAN to retain archive logs.
```
RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
```
(Recommended) Set the DB_RECOVERY_FILE_DEST_SIZE parameter to a value that matches your available disk space, because expired and obsolete log and backup files can quickly fill your disk. For more information, see Oracle's DB_RECOVERY_FILE_DEST_SIZE documentation.
Enable supplemental logging. Choose one of the logging options below and follow the corresponding instructions:
Database-level minimal supplemental logging with table-level identification key logging
NOTE: We recommend using this option because it minimizes the overhead on your source database.
i. Enable minimal supplemental logging by executing the following SQL statement. Minimal supplemental logging ensures that LogMiner has sufficient information to process the redo operations associated with DML changes.
NOTE: Per Oracle's database-level supplemental logging documentation, "minimal supplemental logging does not impose significant overhead on the database that generates the redo log files."
```
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA;
```
ii. Once minimal supplemental logging has been enabled at the database level, you must enable either primary key identification logging or all supplemental logging.
NOTE: You need to enable all supplemental logging only for:
- tables without a primary key
- tables whose primary key or composite primary key values are expected to change
To enable primary key supplemental logging only for specific tables, run the following SQL statement for each table:
```
ALTER TABLE "<schema>"."<table>" ADD SUPPLEMENTAL LOG DATA (PRIMARY KEY) COLUMNS;
```
To enable all supplemental logging only for specific tables, run the following SQL statement for each table:
```
ALTER TABLE "<schema>"."<table>" ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
```
NOTE: With all supplemental logging, if a row is updated, all of the columns associated with that row are placed in the redo log file.
Database-level identification key logging
Enable either primary key identification key logging or all supplemental logging at the database level if you want to enable logging for the entire database.
NOTE: You need to enable all supplemental logging only for:
- tables without a primary key
- tables whose primary key or composite primary key values are expected to change
To enable primary key supplemental logging at the database level, run the following SQL statement:
```
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (PRIMARY KEY) COLUMNS;
```
To enable all supplemental logging at the database level, run the following SQL statement:
```
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
```
NOTE: If you don't configure the logging data correctly, you will receive a warning when Fivetran encounters a primary key change. The warning will give you customized instructions on how to fix the problem.

Grant the Fivetran user permission to run LogMiner. Follow the instructions below for your database type:

For standalone databases

GRANT SELECT ON SYS.V_$PARAMETER TO <username>;
GRANT SELECT ON SYS.V_$ARCHIVED_LOG TO <username>;
GRANT SELECT ON SYS.V_$ARCHIVE_DEST TO <username>;
GRANT SELECT ON SYS.V_$LOGMNR_CONTENTS TO <username>;
GRANT EXECUTE ON DBMS_LOGMNR TO <username>;
GRANT EXECUTE ON DBMS_LOGMNR_D TO <username>;
GRANT SELECT ANY TRANSACTION TO <username>;
GRANT EXECUTE_CATALOG_ROLE TO <username>;

For multitenant container databases Beta

Execute the following command before granting access to LogMiner.

ALTER SESSION SET CONTAINER=CDB$ROOT;

GRANT SELECT ON SYS.V_$PARAMETER TO <username>;
GRANT SELECT ON SYS.V_$ARCHIVED_LOG TO <username>;
GRANT SELECT ON SYS.V_$ARCHIVE_DEST TO <username>;
GRANT SELECT ON SYS.V_$LOGMNR_CONTENTS TO <username>;
GRANT EXECUTE ON DBMS_LOGMNR TO <username>;
GRANT EXECUTE ON DBMS_LOGMNR_D TO <username>;
GRANT SELECT ANY TRANSACTION TO <username>;
GRANT EXECUTE_CATALOG_ROLE TO <username>;

(Oracle version 12 and above) Grant logmining permissions to the Fivetran user.
```
GRANT LOGMINING TO <username>;
```

(Optional) Grant permissions to additional system tables.

NOTE: We recommend granting these permissions to optimize the connector's performance and reliability.

For standalone databases

GRANT SELECT ON DBA_FREE_SPACE TO <username>;
GRANT SELECT ON SYS.V_$LOG TO <username>;
GRANT SELECT ON SYS.V_$TEMPFILE TO <username>;
GRANT SELECT ON SYS.V_$DATAFILE TO <username>;

For multitenant container databases Beta

Execute the following command before granting access.

ALTER SESSION SET CONTAINER=CDB$ROOT;

GRANT SELECT ON DBA_FREE_SPACE TO <username>;
GRANT SELECT ON SYS.V_$LOG TO <username>;
GRANT SELECT ON SYS.V_$TEMPFILE TO <username>;
GRANT SELECT ON SYS.V_$DATAFILE TO <username>;

Fivetran Teleport Sync Beta

You do not need to do any further setup to use Fivetran Teleport Sync. However, we recommend that you read our recommendations for Fivetran Teleport Sync before using it.

Finish Fivetran configuration

In your connector setup form, enter a Destination schema prefix. This prefix applies to each replicated schema and cannot be changed once your connector is created.
(Hybrid Deployment only) If your destination is configured for Hybrid Deployment, the Hybrid Deployment Agent associated with your destination is pre-selected in the Select an existing agent drop-down menu. To use a different agent, select the agent of your choice, and then select the same agent for your destination.
In the Host field, enter your RAC node public IP (for example, 1.2.3.4) or URL (for example, your.server.com).
Enter your database's Port number. The port number is usually 1521 for unencrypted connections and 2484 for encrypted connections using SSL/TLS.
Enter the Fivetran-specific User that you created in Step 2.
TIP: In Oracle, usernames are case-sensitive. Make sure to enter the exact username.
Enter the Password for the Fivetran-specific user that you created in Step 2.
Enter your database's SID/Service Name.
(Multitenant container databases only) Enter your database's PDB Name.
(Not applicable to Hybrid Deployment) Choose your Connection method. If you selected Connect via an SSH tunnel, copy or make a note of the Public Key and add it to the authorized_keys file while configuring the SSH tunnel, and provide the following information:
- SSH hostname (do not use a load balancer's IP address/hostname)
- SSH port
- SSH user
- If you enabled TLS on your database in Step 1, set the Require TLS through tunnel toggle to ON.
Select the Update Method: Read Changes via LogMiner or Detect Changes via Fivetran Teleport Sync.
Click Save & Test. Fivetran tests and validates our connection to your Oracle database. Upon successful completion of the setup tests, you can sync your data using Fivetran.

Setup tests

Fivetran performs the following tests to ensure that we can connect to your Oracle RAC database and that it is properly configured:

The Connecting to SSH Tunnel Test validates the SSH tunnel details you provided in the setup form. It then checks that we can connect to your database using the SSH tunnel. (We skip this test if you aren't connecting using an SSH tunnel.)
The Connecting to Host Test validates the database credentials you provided in the setup form. It then verifies that the database host is not private and checks that we can connect to the host.
The Validating Certificate Test generates a pop-up window where you must choose which certificate you want Fivetran to use. It then validates that certificate and checks that we can connect to your database using TLS. (We skip this test if you selected an indirect connection method and then disabled the Require TLS through Tunnel toggle.)
The Validating Database Version Test checks your database version. The test passes if your database version is 12.2 or above or if your database version is 12.1 or below and you are connecting using an SSH tunnel.
The Validating Access to PDB Test checks that we have access to your pluggable database. We skip this test if your database is not a multitenant container database.
The Validating System View Permission Test checks that we have permission to access the DBA_EXTENTS, DBA_TABLESPACES, and DBA_SEGMENTS system views.
The Validating Archive Log Access Test checks that we can access your archive log.
The Validating Archive Log Retention Period Test verifies that your archive log is set to retain at least 24 hours' worth of changes.
The Access to Database-Level Supplemental Logging Test verifies that supplemental logging is enabled on your database. If supplemental logging is not enabled, the test passes but generates a warning message in your dashboard.

NOTE: The tests may take a few minutes to finish running.

Connector Overview

Schema Information

Release Notes

API Connector Configuration

Documentation Home

Oracle RAC Setup Guide

Prerequisites

Setup instructions

Choose connection method

Create user

Grant read-only access

Configure incremental sync method

Finish Fivetran configuration

Setup tests

Related articles