Create a Connector
Creates a new connector within a specified group in your Fivetran account. Runs setup tests and returns testing results.
Request schema
Header parameters
HTTP: basicAuth
HTTP AuthorizationScheme: basic
Request
The unique identifier for the group within the Fivetran system
The connector type name within the Fivetran system
Specifies whether we should trust the certificate automatically. The default value is FALSE. If a certificate is not trusted automatically, it has to be approved with Certificates Management API Approve a destination certificate.
Specifies whether we should trust the SSH fingerprint automatically. The default value is FALSE. If a fingerprint is not trusted automatically, it has to be approved with Certificates Management API Approve a destination fingerprint.
Specifies whether the setup tests should be run automatically. The default value is TRUE.
Specifies whether the connector is paused
Specifies whether the connector should be paused after the free trial period has ended
The connector sync frequency in minutes
The optional parameter that defines the sync start time when the sync frequency is already set or being set by the current request to 1440. It can be specified in one hour increments starting from 00:00 to 23:00. If not specified, we will use the baseline sync start time. This parameter has no effect on the 0 to 60 minutes offset used to determine the actual sync start time
(Deprecated) The unique identifier for the hybrid deployment agent within the Fivetran system
The unique identifier for the hybrid deployment agent within the Fivetran system
The URI on your site we redirect the end user to after successful setup. The URI must start with the https or http prefix.
An optional parameter that lets you hide the embedded setup guide in the Connect Card.
The proxy agent ID
Your 15five API key.
Destination schema name. Schema name is permanent and cannot be changed after connection creation
POST /v1/connectors HTTP/1.1
Accept: application/json;version=2
Authorization: Basic REPLACE_BASIC_AUTH
Content-Type: application/json
Host: api.fivetran.com
Content-Length: 754
{
"group_id": "group_id",
"service": "15five",
"trust_certificates": true,
"trust_fingerprints": true,
"run_setup_tests": true,
"paused": false,
"pause_after_trial": false,
"sync_frequency": 1440,
"data_delay_sensitivity": "LOW",
"data_delay_threshold": 0,
"daily_sync_time": "14:00",
"schedule_type": "string",
"local_processing_agent_id": "local_processing_agent_id",
"hybrid_deployment_agent_id": "hybrid_deployment_agent_id",
"connect_card_config": {
"redirect_uri": "https://your.site/path",
"hide_setup_guide": true
},
"proxy_agent_id": "proxy_agent_id",
"private_link_id": "string",
"networking_method": "Directly",
"config": {
"api_key": "your_15five_api_key",
"schema": "schema_name"
}
}
Responses
Successful response schema
Response status code
Response status text
The unique identifier for the connector within the Fivetran system
The connector type name within the Fivetran system
The name used both as the connector's name within the Fivetran system and as the source schema's name within your destination
Specifies whether the connector is paused
The collection of tasks for the connector
Code
Warning message
The collection of warnings for the connector
Code
Warning message
Schema status. Returned only for connectors that support Universal Column Masking flow.
The current data update state of the connector. The available values are:
- on_schedule - the sync is running smoothly, no delays
- delayed - the data is delayed for a longer time than expected for the update.
The current setup state of the connector. The available values are:
- incomplete - the setup config is incomplete, the setup tests never succeeded
- connected - the connector is properly set up
- broken - the connector setup config is broken.
The current sync state of the connector. The available values are:
- scheduled - the sync is waiting to be run
- syncing - the sync is currently running
- paused - the sync is currently paused
- rescheduled - the sync is waiting until more API calls are available in the source service.
The boolean specifying whether the connector should be triggered to re-sync all historical data. If you set this parameter to TRUE, the next scheduled sync will be historical. If the value is FALSE or not specified, the connector will not re-sync historical data. NOTE: When the value is TRUE, only the next scheduled sync will be historical, all subsequent ones will be incremental. This parameter is set to FALSE once the historical sync is completed.
The scheduled time for the next sync when sync_state is rescheduled. If schedule_type is manual, then the connector expects triggering the event at the designated time through the Sync Connector Data endpoint.
The connector daily sync start time that we return only when the sync frequency is set to 1440 (which means 24 hours) and the daily_sync_time parameter was set using the Create a Connector or Modify a Connector request
The timestamp of the time the connector sync succeeded last time
The connector sync frequency in minutes
The unique identifier for the group within the Fivetran system
The unique identifier of the user who has created the connector in your account
Setup tests results for this connector
Setup test title
Setup test status
Setup test message
Setup test details.
The additional information about the connector's state. The format of this parameter is specific for each connector type
The connector type version within the Fivetran system
The timestamp of the time the connector was created in your account
The timestamp of the time the connector sync failed last time
The proxy agent ID
The connect-card auth token
The Connect Card URI for the user interface
Specifies whether the connector should be paused after the free trial period has ended
Custom sync delay notification threshold in minutes. The default value is 0. This parameter is only used when data_delay_sensitivity set to CUSTOM.
The level of data delay notification threshold. Possible values: LOW, NORMAL, HIGH, CUSTOM. The default value NORMAL. CUSTOM is only available for customers using the Enterprise plan or above.
The connector schedule configuration type. Supported values: auto, manual
(Deprecated) The unique identifier for the hybrid deployment agent within the Fivetran system
The URI on your site we redirect the end user to after successful setup. The URI must start with the https or http prefix.
An optional parameter that lets you hide the embedded setup guide in the Connect Card.
The unique identifier for the hybrid deployment agent within the Fivetran system
Your 15five API key.
{
"code": "Success",
"message": "Operation performed.",
"data": {
"id": "connector_id",
"service": "15five",
"schema": "schema.table",
"paused": false,
"status": {
"tasks": [
{
"code": "resync_table_warning",
"message": "Resync Table Warning",
"details": "string"
}
],
"warnings": [
{
"code": "resync_table_warning",
"message": "Resync Table Warning",
"details": "string"
}
],
"schema_status": "ready",
"update_state": "delayed",
"setup_state": "connected",
"sync_state": "scheduled",
"is_historical_sync": false,
"rescheduled_for": "2024-12-01T15:43:29.013729Z"
},
"daily_sync_time": "14:00",
"succeeded_at": "2024-03-17T12:31:40.870504Z",
"sync_frequency": 1440,
"group_id": "group_id",
"connected_by": "user_id",
"setup_tests": [
{
"title": "Test Title",
"status": "PASSED",
"message": "Test Passed",
"details": "Test Details"
}
],
"source_sync_details": {},
"service_version": 0,
"created_at": "2023-12-01T15:43:29.013729Z",
"failed_at": "2024-04-01T18:13:25.043659Z",
"private_link_id": "string",
"proxy_agent_id": "proxy_agent_id",
"networking_method": "Directly",
"connect_card": {
"token": "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJkIjp7ImxvZ2luIjp0cnVlLCJ1c2VyIjoiX2FjY291bnR3b3J0aHkiLCJhY2NvdW50IjoiX21vb25iZWFtX2FjYyIsImdyb3VwIjoiX21vb25iZWFtIiwiY29ubmVjdG9yIjoiY29iYWx0X2VsZXZhdGlvbiIsIm1ldGhvZCI6IlBiZkNhcmQiLCJpZGVudGl0eSI6ZmFsc2V9LCJpYXQiOjE2Njc4MzA2MzZ9.YUMGUbzxW96xsKJLo4bTorqzx8Q19GTrUi3WFRFM8BU",
"uri": "https://fivetran.com/connect-card/setup?auth=eyJ0eXAiOiJKV1QiLCJh..."
},
"pause_after_trial": false,
"data_delay_threshold": 0,
"data_delay_sensitivity": "NORMAL",
"schedule_type": "auto",
"local_processing_agent_id": "local_processing_agent_id",
"connect_card_config": {
"redirect_uri": "https://your.site/path",
"hide_setup_guide": true
},
"hybrid_deployment_agent_id": "hybrid_deployment_agent_id",
"config": {
"api_key": "your_15five_api_key"
}
}
}